Cable Encoder-Resolver Cerviflex PE/PUR-C

Combined shielded power and control cable for use in industrial processes where good electromagnetic protection is required,, specially designed for Encoder-Resolver. Extra-flexible and with high resistance to abrasion and bending in dynamic installations, suitable for use in dynamic installations (cable chains). The cable can also be used in outdoor applications, due to its resistance to UV radiation, ozone and humidity.
Suitable for use in the food industry. Special polyurethane outer jacket resistant to cleaning and disinfection agents typically used in the food and beverage industry. (Requirements obtained through certification tests carried out by ECOLAB).

Construction

1. Conductor

Extra flexible bare copper wires

2. Insulation

Polyolefin and/or polyester (UL-CSA Standards)
Identification: See attached table

3. Composition

Combined cables: All elements laid up together with eventual fillings in the interstices + non-woven tape wrapping.
See attached table "Construction Data" and "Formation" for details on composition, screens and individual sheaths.

4. Overall screen

Braid of tinned copper wires
Coverage: 85% + wrapping of non-woven tape

5. Outer sheath

PUR (Polyuethane, UL-CSA Standards)
Colour: Green (Similar RAL 6018) according to DESINA

Technical characteristics

1. Operating voltage

300 V

2. Test Voltage

2000 V

3. Operating Tª (conductor)

-40°C to +80°C

4. Min. bending radius

Fixed installation: 5xD // Dynamic installation: 7,5xD

Standards / Properties

1. Reference standards

UL File No: E83517
According to UL 758, UL 1581 y CSA 22.2 210.2
UL 90°C 300V, Style 21209 - CSA AWM I/II A/B 90°C 300V

2. Flame Retardant

UNE-EN 60332-1 (IEC 60332-1), UL VW-1, CSA FT1

3. Halogen free

UNE-EN 60754-1 (IEC 60754-1)

4. Oil and hydrocarbon resistant

UL 1581, VDE 0472 part 803 A/B

5. Water resistant

UL 1581, IEC 60811

Cable Encoder Resolver Cerviflex PEPUR C